
Short answer: a tempered glass shower cabin (كابينة شاور سيكوريت) needs hinges (wall-to-glass and glass-to-glass at 90°, 135° or 180°) or a sliding kit, plus clamps, a stabiliser bar for tall or unsupported panels, handles or knobs, magnetic and bottom seals, and U-sections or F-sections for fixed panels. Shower glass is typically 8 or 10 mm tempered, and hardware should be SS 304 stainless, or SS 316 near the sea, in finishes such as chrome, brushed steel, matt black or gold.
Shower cabin accessories explained
| Accessory | Arabic name | What it does | Typical spec |
|---|---|---|---|
| Wall-to-glass hinge | مفصلة حيطة زجاج | Hangs the door on the wall | For 8 – 12 mm glass; usually 2 per door |
| Glass-to-glass hinge (90°, 135°, 180°) | مفصلة زجاج زجاج، مفصلة 180، مفصلة 135 | Hangs the door on a fixed glass panel at the right angle | Angle matches the layout (in-line 180°, corner 90°, angled 135°) |
| Sliding kit (top tube, barn-door rail, roller kit) | طقم سحاب شاور، كابينة جرار، بارن دور | Lets the door slide instead of swing | Usually 8 mm glass; roller kits typically rated about 40 – 80 kg per door |
| Stabiliser / support bar | بار تثبيت شاور، ذراع تقوية | Braces tall fixed panels and walk-in screens | Round or square stainless bar, wall-to-glass or glass-to-glass |
| Clamps | كلبس زجاج، ماسك زجاج | Fix panels to walls, floors or each other | 8 – 12 mm glass |
| Handles and knobs | مقبض شاور، أكرة شاور، مقبض فوطة | Open the door; towel-bar handles double as towel rails | SS 304 typical |
| Seals (magnetic, bottom sweep, side seal) | جلدة شاور مغناطيس، كاوتش شاور، جلدة سفلية | Keep water inside and let the door close softly | Sized to the glass thickness (6, 8 or 10 mm) |
| U-section / F-section | قطاع يو، قطاع اف | Hold fixed panels in the floor or wall | Sized to the glass plus a gasket gap |
Hinged shower doors: choosing hinges
Hinges carry the full weight of the door, so they matter most. A typical door uses two hinges, and installers usually keep a door to about 40 – 45 kg per hinge pair. Choose the angle by layout: 180° for a door in line with a fixed panel, 90° for a corner, and 135° for angled or pentagon cabins. Branded ranges such as Häfele Elegans come in 90°, 135° and 180° versions for mostly 8 – 12 mm glass, and CRL, Bohle and Kinlong also make shower hinges.
Sliding shower cabins (كابينة شاور جرار)
Sliding cabins suit small bathrooms because the door does not swing into the room. The main types are a top tube or rail with rollers, the industrial-look barn-door rail with exposed rollers, and compact roller kits. Branded systems include Bohle MasterTrack, Häfele and Kinlong. Read shower cabins for small bathrooms to compare sliding, hinged and walk-in.
Walk-in screens and fixed panels
A walk-in screen is a fixed panel without a door. It stands in a U-section or on clamps, and a stabiliser bar to the wall or ceiling stops it flexing, especially on tall panels or ones without a return.
Finishes: chrome, black, gold
Shower hardware comes in polished chrome, satin or brushed stainless, matt black, gold, brushed gold and rose gold. Matching the hinges, handle, bar and profiles to the bathroom taps gives the most finished look; black frames and fittings are especially popular in modern bathrooms.
SS 304, SS 316 or zinc?
SS 304 stainless is the standard for shower hardware. In hotel bathrooms and coastal homes (North Coast, Sokhna, Red Sea), SS 316 resists corrosion much better. Cheaper unbranded fittings often use zinc-alloy bodies, which can corrode and lose their finish in a humid bathroom. Read SS 304 vs SS 316.
Before you buy: ask what the hinges are made of, how many hinges hold each door, the glass thickness, and whether the seals are included. A quotation that only says “accessories” hides the most important choice.
Shower cabin accessories from M-Square
M-Square is a factory and installer of made-to-measure tempered glass shower cabins. Every cabin comes with hardware matched to its glass weight and layout, stainless steel fittings and seals, in your choice of finish. See our shower cabins and the tempered glass accessories guide.
Frequently asked questions
What accessories does a shower cabin need?
Hinges or a sliding kit, clamps, a stabiliser bar for tall or unsupported panels, a handle or knob, magnetic and bottom seals, and U-sections or F-sections for fixed panels.
What is the difference between a 90°, 135° and 180° shower hinge?
The angle is between the door and the panel or wall it hangs on: 180° for an in-line panel, 90° for a corner, and 135° for angled cabins.
How thick is shower cabin glass?
Typically 8 or 10 mm tempered glass; the hardware must be made for the same thickness.
Which is better for shower hardware, SS 304 or SS 316?
SS 304 suits most homes; SS 316 is better near the sea and in hotel bathrooms because it resists corrosion more.
Why does my shower door drop or leak?
Doors usually drop when the hinges are undersized or loose, and leak when the magnetic or bottom seals are worn or missing. Adjusting the hinges and replacing the seals usually fixes both.
Does M-Square supply shower cabin accessories?
Yes. We supply and install all the hardware and seals with every shower cabin we make.
Sources: Häfele shower fittings · CRL frameless shower hardware · Bohle
Need advice for your project?
Our technical office replies with honest recommendations and an itemised quotation, or visits to measure on site.


